Grade 8 Lashing Components - BS EN 12195-3
Grade 8 Clevis Grab Hook
Conforms to BS EN 12195-3.
Suitable for use with Grade 8 chains.
Clevis fitting enables direct connection to the chain.
For use with Grade 8 chain and loadbinders. Supplied with safety pin locking device to enhance operational safety
| Part Code |
Chain Size (mm) |
Lashing Capacity (kN) |
A |
B (mm) |
E (mm) |
L (mm) |
M (mm) |
Mass (Kg) |
|---|---|---|---|---|---|---|---|---|
| MB8.080.GH | 8 | 40 | 9.5 | 35.0 | 11.0 | 89.0 | 49.5 | 0.33 |
| MB8.100.GH | 10 | 63 | 12.5 | 42.5 | 13.2 | 126.5 | 70.5 | 0.88 |
| MB8.130.GH | 13 | 100 | 15.0 | 53.0 | 16.5 | 163.5 | 90.0 | 1.85 |
| MB8.160.GH | 16 | 160 | 19.5 | 65.5 | 19.2 | 183.5 | 112.5 | 3.24 |
Grade 8 Clevis Sling Hook
Conforms to BS EN 12195-3.
Suitable for use with Grade 8 chains.
Clevis fitting enables direct connection to chain.
For use with Grade 8 chain and loadbinders.
| Part Code |
Chain Size (mm) |
Lashing Capacity (kN) |
A |
B (mm) |
C (mm) |
E (mm) |
H (mm) |
K (mm) |
Mass (Kg) |
|---|---|---|---|---|---|---|---|---|---|
| MB8.080.SH | 8 | 40 | 9.5 | 37.0 | 37.0 | 29.0 | 32.5 | 85.5 | 0.52 |
| MB8.100.SH | 10 | 63 | 13.0 | 49.0 | 46.0 | 39.0 | 35.0 | 104.0 | 1.05 |
| MB8.130.SH | 13 | 100 | 16.5 | 56.5 | 56.0 | 47.0 | 42.5 | 128.0 | 2.00 |
| MB8.160.SH | 16 | 160 | 21.5 | 70.5 | 60.0 | 55.0 | 54.0 | 150.0 | 3.70 |
Grade 8 Component Connector
The William Hackett Grade 8 forged lifting components are manufactured by YOKE from alloy steel in accordance with EN1677. All forged components are individually magnaflux crack detected after heat treatment, they are then individually proof load tested to 2.5 times working load limit in accordance with EN1677. Only components fully compliant with all aspects of EN1677 can be used in chain slings certified to EN818-4. The William Hackett Grade 8 lifting components are suitable for use in a temperature range of -40°C up to 200°C without reduction in working load limit.
| Part Code |
Chain Size (mm) |
Lashing Capacity (kN) |
A (mm) |
B (mm) |
D (mm) |
K (mm) |
Mass (Kg) |
|---|---|---|---|---|---|---|---|
| 8-015-07 | 8 | 40 | 18 | 22 | 9 | 57 | 0.2 |
| 8-015-10 | 10 | 63 | 25 | 26 | 11 | 68 | 0.3 |
| 8-015-13 | 13 | 100 | 30 | 35 | 16 | 91 | 0.7 |
| 8-015-16 | 16 | 160 | 36 | 38 | 19 | 100 | 1.1 |
| 8-015-20 | 20 | 245 | 42 | 46 | 22 | 122 | 1.7 |
| 8-015-22 | 22 | 294 | 49 | 59 | 24 | 152 | 3.0 |
| 8-015-26 | 26 | 415 | 55 | 62 | 30 | 162 | 4.6 |
| 8-015-32 | 32 | 618 | 69 | 79 | 36 | 202 | 8.6 |
Grade 8 Weld On Lifting Point
| Part Code |
W.L.L. (t) |
Lashing Capacity (kN) |
D (mm) |
F (mm) |
H (mm) |
K (mm) |
L (mm) |
R (mm) |
W (mm) |
Mass (Kg) |
| 8-057-1T | 1.0 | 20 | 14.2 | 27 | 55 | 38 | 105 | 24 | 50 | 0.5 |
| 8-057-3T | 3.0 | 60 | 17.2 | 34 | 60 | 48 | 112 | 29 | 58 | 0.9 |
| 8-057-5T | 5.0 | 98 | 22.5 | 43 | 74 | 61 | 154 | 33 | 64 | 1.8 |