SS-C4 / CP-C4 Anti Corrosion Chain Hoist
The Hackett SS-C4 / CP-C4 Anti-Corrosion Topside and Subsea chain blocks meet and exceed the requirements of international standards
British Standard BS EN13157:2004 + AI:2009
American Standard ASME B30.16-2012
Australian Standard AS1418.2-1997
South African Standard SANS 1594:2007,
NORSOK R-002: 2017
William Hackett has taken its extensive knowledge of corrosion protection acquired in the supply of specialist topside and subsea hoisting range to the offshore sector and translated this technology to the newly developed second generation range of Hackett SS-C4 and CP-C4 anti corrosion topside and subsea chain blocks.
These hoists can be supplied in the following configurations
- Single hook suspension unit
- Low headroom combined chain block and push travel trolley
- Low headroom combined chain block and geared travel trolley
All the above hoist configurations can also be supplied with the following options
- Calibrated Grade T (8) load chain to BS EN818-7 zinc plated with zinc plated hand chain
- Calibrated Grade T (8) load chain to BS EN818-7 DT9 corrosion coated and hand chain Dacromet corrosion coated.
- Calibrated Grade S (6) 316L stainless steel load chain, hand chain and bottom hook (stainless steel bottom hooks are only available for 500kg and 1 tonne units)
- Overload protection option available.
Features
- 500hrs + Protection against salt spray tests according to ASTM B117
- Twin pawls as standard
- Heavy duty forged safety catches
- Stainless steel fixing used throughout the hoist
- Hook housing is bolt connected using cap head screws and nyloc nuts
- All hoist components corrosion protected• Load chain meets the requirements of European standards EN818-7
- Compact and robust design for easy handling
Performance and Testing
The Hackett SS-C4 / CP-C4 Chain Blocks have been fully tried and tested to include:
- Minimum Breaking Load - a minimum of 4 x the WLL
- The load chain anchor / end stop tested to at least 2.5 x the WLL with no restriction of either the brake or gears
- Proof tested at 1.5 x the Working Load Limit
- Light load of 2% of Working Load Limit
Specifications
Part Code |
WLL |
No. of |
Load Chain |
Standard Lift |
a |
b |
e |
f |
g |
h |
Mass |
Extra Weight |
022.SS.050 | 0.5 | 1 | 5.0 x 15 | 3 | 125 | 130 | 27.5 | 32 | 37 | 280 | 7.8 | 0.54 |
022.SS.100 | 1.0 | 1 | 6.0 x 18 | 3 | 134 | 155 | 31.5 | 40 | 44 | 306 | 11.1 | 0.8 |
022.SS.200 | 2.0 | 1 | 8.0 x 24 | 3 | 157 | 185 | 36.5 | 46 | 52 | 445 | 16.8 | 1.4 |
022.SS.3D00 | 3.2 | 2 | 8.0 x 24 | 3 | 157 | 235 | 43.5 | 52 | 62 | 520 | 24.2 | 2.8 |
022.SS.500 | 5.0 | 2 | 10.0 x 30 | 3 | 180 | 262 | 51 | 60 | 77 | 600 | 39.8 | 4.4 |
022.SS.1000 | 10.0 | 4 | 10.0 x 30 | 3 | 180 | 406 | 53 | 85 | - | 760 | 89.7 | 8.8 |
022.SS.1500 | 15.0 | 6 | 10.0 x 30 | 3 | 210 | 406 | 80 | 100 | - | 1000 | 91.1 | 13.2 |
022.SS.2000 | 20.0 | 8 | 10.0 x 30 | 3 | 225 | 550 | 80 | 110 | - | 1150 | 197 | 17.6 |